2017 FRC Control SystemFRC Java Programming WPILib sensorsUltrasonic Sensors - Measuring robot distance to a surface

Ultrasonic Sensors - Measuring robot distance to a surface

Ultrasonic sensors are a common way to find the distance from a robot to the nearest surface

Ultrasonic rangefinders

Ultrasonic rangefinders use the travel time of an ultrasonic pulse to determine distance to the nearest object within the sensing cone. There are a variety of different ways that various ultrasonic sensors communicate the measurement result including:

Ping-Response Ultrasonic sensors

Ping-Response Ultrasonic sensors

To aid in the use of Ping-Response Ultrasonic sensors such as the Devantech SRF04 pictured above, WPILib contains an Ultrasonic class. This type of sensor has two transducers, a speaker that sends a burst of ultrasonic sound, and a microphone that listens for the sound to be reflected off of a nearby object. It requires two connections to the roboRIO, one that initiates the ping and the other that tells when the sound is received. The Ultrasonic object measures the time between the transmission and the reception of the echo.

Creating an Ultrasonic object and reading the distance

C++
class ultrasonicSample : public SampleRobot { Ultrasonic *ultra; // creates the ultra object public: ultrasonicSample() { ultra = new Ultrasonic(1, 1); // assigns ultra to be an ultrasonic sensor which uses DigitalOutput 1 for the echo pulse and DigitalInput 1 for the trigger pulse ultra->SetAutomaticMode(true); // turns on automatic mode } void Teleop() { int range = ultra->GetRangeInches(); // reads the range on the ultrasonic sensor } };

Java
import edu.wpi.first.wpilibj.SampleRobot; import edu.wpi.first.wpilibj.Ultrasonic; public class RobotTemplate extends SampleRobot { Ultrasonic ultra = new Ultrasonic(1,1); // creates the ultra object andassigns ultra to be an ultrasonic sensor which uses DigitalOutput 1 for // the echo pulse and DigitalInput 1 for the trigger pulse public void robotInit() { ultra.setAutomaticMode(true); // turns on automatic mode } public void ultrasonicSample() { double range = ultra.getRangeInches(); // reads the range on the ultrasonic sensor }

Both the Echo Pulse Output and the Trigger Pulse Input have to be connected to digital I/O ports on a Digital Sidecar. When creating the Ultrasonic object, specify which channels it is connected to in the constructor, as shown in the examples above. In this case, ULTRASONIC_ECHO_PULSE_OUTPUT and ULTRASONIC_TRIGGER_PULSE_INPUT are two constants that are defined to be the digital I/O port numbers. Do not use the ultrasonic class for ultrasonic rangefinders that do not have these connections. Instead, use the appropriate class for the sensor, such as an AnalogChannel object for an ultrasonic sensor that returns the range as an analog voltage.

Analog Rangefinders

Many ultrasonic rangefinders return the range as an analog voltage. To get the distance you multiply the analog voltage by the sensitivity or scale factor (typically in inches/V or inches/mV). To use this type of sensor with WPILib you can either create it as an Analog Channel and perform the scaling directly in your robot code, or you can write a class that will perform the scaling for you each time you request a measurement.

I2C and other Digital Rangefinders

Rangefinders that communicate digitally over I2C, SPI, or Serial may also be used with the roboRIO though no specific classes for these devices are provided through WPILib. Use the appropriate communication class based on the bus in use and refer to the datasheet for the part to determine what data or requests to send the device and what format the received data will be in.

0 Report Errors

Use this form to report any errors with the documentation. For help with WPILib, please use the FIRST Forums at http://forums.usfirst.org For reporting WPILib bugs, please submit an issue on GitHub at https://github.com/wpilibsuite/allwpilib/issues/new

Ignore